Running Sport | silicon PU material

Silicon PU is a ergonomic principle and meets the needs of physical characteristics of motion,A healthy professional elastic synthetic court surface material system with hard upper and elastic lower structure characteristics and can be directly constructed on cement or asphalt foundation.One component silicone modified polyurethane buffer rebound structure, two component modified acrylic acid as wear resistant surface.Generally used as basketball courts, badminton courts and other sports venues.

Profession

Pro-environment

Durable

Silicon PU performance advantages

Profession

Professional structure designed for health sports

Silicon PU hard elastic structure both motion texture and motion protection

Pro-environment

Truly non-toxic and harmless green products

From the beginning of R & D positioning is to environmental protection as the premise, from the production process of semi-finished products to define the implementation of the highest environmental protection standards at home and abroad.

CPs

No Chlorinated paraffins

MOCA

No MOCA

Benzene

Benzene free solvents

TDI

No TDI

VOC

Indoor VOC limits

HM

No Heavy metal

Durable

Superior wear and weather resistance, long service life

The quality of silicon PU is mainly judged by its performance, quality and durability.

Super wear resistance

The water-based surface layer of silicon PU can ensure the appearance structure is stable and the wear resistance can meet the needs of long-term high frequency use.

Superior weather resistance

Silicon PU will not fade and harden because of changes in outdoor high and low temperature environment, and can maintain bright colors for a long time.

Excellent stain resistance

The silicon PU surface layer is tough and dense, which is not easy to be scratched by sole or other hard objects. It can be kept as clean as new by simple water cleaning.

Silicon PU standard color

Conventional light blue

Conventional deep blue

Conventional sapphire blue

Conventional dark blue

Conventional green

The conventional red

Silicon PU construction steps

1. Basic treatment

Cement or asphalt foundation shall be treated according to the construction guidelines, and the foundation strength shall reach the C25 strength standard of building concrete after treatment.

2. Roll bottom coating

The special base coating is divided into a roll coating or scratch coating on the base surface.

3. Water repair

Sprinkle water throughout the site, find out where the water is, circle it with a pen, and dry the site; Use a ruler or scraper to level the water.

4. Make the back cover even

Scratch and apply the leveling material to the base with a trowel.

5. Scraping and coating elastic layer

Scrape with tooth scraper, according to the thickness of the standard amount of distribution of scrape

6. Scraping coating reinforcement layer

Scrape with tooth scraper, according to the thickness of the standard amount of distribution of scrape

7. Polish the reinforcing layer

After the reinforced layer is solidified, a special sand belt machine with 80 purpose sand paper is used to polish the whole layer.

8. Scrape the coating layer

The material is prepared according to different site uses and coated on the base surface with tooth scrapers.

9. Line

Measure and position according to standard size, mark boundary position, use special marking paint to brush between fine grain paper.